Product Description; Control Panel - IKEA POTENTIELL Mode D'emploi

ENGLISH
Product description
Control panel
T1
Light ON/OFF.
T2
Speed decrease.
Press "T2" button to decrease the speed
from 4 (intensive) to 1.
Press "T2" button during operation at
speed 1, the hood sets to OFF.
T3
Speed increase.
Press T3 button and the hood sets from
OFF to speed 1.
Press the button (hood ON) to increase
the speed of the motor from 1 to 4
(intensive).
The respective LED goes on for each
speed.
L1
Speed 1 LED
L2
Speed 2 LED
L3
Speed 3 LED
L4
Speed 4 LED
Temperature Alarm
The hood is equipped with a temperature
sensor which activates the motor at speed 3
in case the temperature in the display zone
is too high (LED L3 flashing).
1

Control Panel.

2
Light.
3
Grease Filter.
1
2
3
T2
L1
This condition remains as such until the
temperature falls below the alarm
This mode can be quit by pressing key T2
(Speed 2), or T3 (Speed 4).
T1
L2 L3 L4
7
T3