Maintenance - INVENTOR CLCO290-09 Manuel D'utilisateur

|Maintenance

WARNING:
-Be sure to unplug the unit before cleaning or
servicing
-DO NOT use flammable liquids or chemicals to
clean the unit.
-Do not wash the unit directly under a tap or
using a hose as it may cause electrical shock.
-DO NOT operate this unit if the power cable
is damaged in any way. If the power cord is
damaged it must be replaced from the product
manufacturer and never repaired.
Clean the Air Filter
Air filter
(take out)
Remove the air filter
CAUTION
DO NOT operate the unit without filter because
dirt and lint will clog it and reduce performance.
Maintenance Tips
- Clean the air filter every two weeks to prevent
inferior fan operation due to dust.
-The water collection tray must be drained
immediately in the event that the error P1
appears on the digital control panel, and also
before storage to prevent the possibility of
mold growth.
-In households with animals, you will have to
periodically wipe down
the grill to prevent blocked airflow due to
animal hair.
EN
Clean the Unit
Use a damp lint-free cloth to clean the unit
enclosure. Dry with a clean and lint free cloth
cloth.
Store the unit when not in use
-Drain the unit's water collection tray as per the
instructions in the following section.
-Operate the device on FAN mode for 12
hours in a warm room to dry and prevent the
possibility of mold growth.
- Power off the unit and unplug.
-Clean the air filter as per the instructions in the
previous section. Reinstall the clean and dry
filter before storing.
-Batteries from the remote control should be
removed.
-Store in a cool, shady area. Any exposure
directly to sunlight or in extreme heat situations
may minimize the lifespan of this device.
NOTE: The main chassis and front of the unit
may be cleaned with by using a lint-free cloth
and soapy water (using a mild detergent) Dry
with a clean cloth. The use of harsh cleansers,
or the waxing and polishing of the unit is
strongly not advised. When cleaning the digital
control panel be certain the cloth is dry as any
water around the controls may cause damage
to the unit.
17