Articulated Torch Bodies; Device Concept - Fronius TTB 80 G Instructions De Service

Articulated torch bodies

Device concept

Assembling and The articulated torch body is assembled in the same way as a conventional torch body -
setting up an arti- see
culated torch bo-
dy
Twist the front part of the articulated torch body to adapt it to the job in hand:
1
Fitting the torch body on page 67.
The articulated torch bodies can be indivi-
dually adapted to a wide variety of situa-
tions and applications, for example in the
case of restricted part accessibility or diffi-
cult welding positions.
Due to the articulated joint, the welder's
hand is closer to the torch handle and thus
to the torch triggers.
With articulated welding torches, no mate-
rial weakening occurs during setup.
CAUTION!
Danger if the articulated torch body is
screwed out too far.
The torch body may be damaged.
▶
Unscrew the front part of the articula-
max. 1x
ted torch body by no more than 1 turn.
89