Using The Printer Or Dvd Recorder - SonoSite S Stand Série Guide D'utilisation

Using the printer or DVD recorder

WARNING:
Caution:
For specific information on using the printer or DVD recorder, including warnings and
cautions, see the manufacturer's operating instructions.
To configure the system for the printer or DVD recorder, see the ultrasound system user guide.
You configure the system on the Connectivity setup page.
To connect the printer or DVD recorder, see the S Series Stand assembly instructions.
To print the screen
Note: Test the printer before a patient exam to ensure that all connectivity is correct.
Use the controls on the printer for printing images. Follow the manufacturer's instructions.
You can also save images and print them from the patient list. For instructions, see the
ultrasound system user guide.
To record images
Note: Test the recorder before a patient exam to ensure that all connectivity is correct.
1 Turn on the DVD recorder.
2 Insert a DVD.
3 Use controls on the DVD recorder to start and stop recording.
Each time you record, a new file saves to the DVD.
To play back images
1 On the ultrasound system, hold down the touchpad key, and press the lower‐right control
key.
2 Press on the DVD recorder.
PLAY
For more information, see the manufacturer's instructions.
6
To avoid the risk of electrical shock or injury, do not connect more than one
peripheral at a time.
To avoid damaging the system, use only peripherals recommended by SonoSite
with the ultrasound system.