Philips AVENT SCF356 Mode D'emploi page 10

ENGLISH
12
Note: You cannot prolong the keep-warm mode of the baby bottle warmer
for more than 20 minutes.
Caution: It is not recommended to reheat breast milk twice, as bacteria
start to develop in the milk.
3 Always check the temperature of the milk before you feed your
baby. Gently swirl the milk in the bottle or milk storage container
and check the temperature of the milk by sprinkling a few drops on
the inside of your wrist (Fig. 12).
4 Unplug the appliance and empty the baby bottle warmer (Fig. 13).
Re-using the baby bottle warmer right away for
another bottle
If you want to heat up another bottle right away, let the baby bottle
warmer cool down for a few minutes. To speed up this process, fill the
baby bottle warmer with fresh cold water. When you turn on the baby
bottle warmer, the progress indicator starts flashing from bottom to top
to indicate that the appliance is heating up again.
Note: If the progress indicator is on but does not flash, the baby bottle
warmer is still too warm to heat up another bottle. Please turn off the baby
bottle warmer, let it cool down for a few minutes and make sure you fill it
with fresh cold water.
Using the baby bottle warmer to warm baby food
1 Put the mains plug in the electrical outlet (Fig. 3).
2 Place a baby food container or jar centrally in the baby bottle warmer
(Fig. 15).
Note: You can leave off the lid of the food container or jar, so you can stir the
baby food during heating.
3 Fill the baby bottle warmer with the same amount of drinking
water as the amount of baby food you want to warm up (for
example, to warm up 125ml/4oz of baby food, you need to use
125ml/4oz of drinking water). If you want to warm up a large
amount of baby food, the maximum water level is approximately