Selecting The Flash Mode; Auto Flash Photography - Nikon Nuvis 200 Manuel D'utilisation

Selecting the flash mode

Press the J button until the desired
flash mode indicator appears.
•For details, see the reference page of each
flash mode.
Auto flash
AUTOJ
→
↓
$
Infinity focus (-P. 25)
↓
# Flash cancel (-P. 22)
↓
J
Anytime flash (-P. 22)
↓
†
Auto flash with slow sync
•When the camera power is turned off,
the flash mode reverts to auto flash.

Auto flash photography

The flash automatically fires when the available light is low.
MOD
SEL
ADJUS
1
Turn the camera on.
(-P. 21)
•
AUTOJ
Auto flash mode is automatically
activated.
•The camera senses when the available
light is low and automatically fires the
flash.
•When the subject is bright, "
appears on the LCD panel and the flash
(-P. 23)
does not fire.
appears on the LCD panel.
#
"
2
Check that the red LED
comes on, then shoot.
•Before shooting with flash, make sure
the subject is within the flash shooting
distance range. Refer to the following
guide (ISO 200).
(24mm): approx. 0.6 to 5.3 m (2 to 17.4 ft.)
(48mm): approx. 0.6 to 2.8 m (2 to 9.2 ft.)
•If the red LED blinks when the shutter release button is
pressed lightly, the flash is being charged and the shutter
is locked. Lightly press the shutter release button again
and wait for the red LED to light up before reshooting.
E
21