Adam Equipment GBK Série Mode D'emploi page 45

EN
This parameter sets the LED
F2 LEd
indicator to off or on and the
LED type (whether LED's are
on
continuous bar or a spot LED
or a segment of colour).
This parameter sets the
F3 bEP
Beeper to off or on. If set to
on, the beeper can further
be set to sound when the
weighing result is within or
outside the check-weighing
limits.
This
F4 CPS
setting of a new Check
weighing password, must be
entered twice when asked.
When
display "donE".
This
F5 nCK
negative
function with ability to do
negative tare.
NOTE:
1. The Check weighing password is separate from the scale password, see
section 13.3.
2. If the password is other than 0000, user must enter the password to gain
access to "F3 LLk", "F4 LEd", "F5 bEP", "F6 CPS" and "F7 nCK".
© Adam Equipment Company 2011
in the form
parameter allows
complete, it
parameter enables
check weighing
bAr - Bar type
Spot - Spot type
Seg Segment
-
of a
oFF - Off
bP oFF - Off
bP inL - Within limits
bP otL - Outside limits
(>20d)
To be entered manually.
will
on
oFF
43 3056610542RevD-Aug11
bAr
bP inL
0000
on