Reset Button; Lock Button; Display Light - Inventum DRS9000AC Mode D'emploi

ADJUSTING THE TIMER -
The timer function can be used to allow the air conditioner to switch on automatically (delayed start) or switch off
automatically at a set time (automatic deactivation).
Delayed start
• Press the timer key
delayed by half an hour each time, up to a total of 10 hours. If you want to delay the start by more than 10 hours,
an hour is added each time until a maximum of 24 hours.
• The set number of hours is shown in the display. Once the temperature is shown on the display again,
the setting has been confirmed.
• When the set number of hours have passed, the air conditioner switches on automatically.
To cancel the delayed start, press the timer key
Automatic deactivation
• Press the timer key
at which you wish the air conditioner to switch off, will be extended by half an hour each time, up to a total
of 10 hours. If you want to delay the deactivation by more than 10 hours, an hour is added each time until a
maximum of 24 hours.
• The set number of hours is shown in the display. Once the temperature is shown on the display again, the setting has
been confirmed.
• When the set number of hours have passed, the air conditioner switches off automatically.
To cancel the automatic deactivation, press the timer key
The settings can also be combined.

RESET BUTTON

The reset button enables you to reset the appliance. All settings are cancelled and the remote control returns
to the factory settings.
• Use a pointy object to press down the reset button

LOCK BUTTON

To prevent the settings of the remote control from being changed, you can lock them with the lock button.
• Use a pointy object to activate the lock
• It is no longer possible to control the appliance with the remote control.
• Press the lock button once more to deactivate the lock. The lock disappears and the appliance can be controlled again
by means of the remote control.

DISPLAY LIGHT

• If the display light on the appliance bothers you, you can switch it off by pressing the key.
Press the key once more to reactivate the display light.
AUTOMATIC RESTART AFTER POWER INTERRUPTION
After a power interruption, the appliance automatically restarts in accordance with the latest settings, once the power
supply has been restored.
CHANGING THE TEMPERATURE UNIT CELSIUS / FAHRENHEIT
Simultaneously hold down the + and - keys for 3 seconds to change the display of the temperature unit.
30
• English
on when the air conditioner is off. Repeatedly press the key
off when the air conditioner is on. Repeatedly press the key
. A lock appears in the display on the remote control.
on until the display shows 0.0 again.
off until the display shows 0.0 again.
.
on. The starting time is
.
off
The required time