Table Des Matières - hestan KWD Instructions D'installation

TABLE OF CONTENTS
3 SAFETY PRECAUTIONS - BEFORE YOU BEGIN
6 MODEL NUMBERS
6 RATING LABEL
6 REGULATORY / CODE REQUIREMENTS
7 USING THE WARMING DRAWER
11 CLEANING AND MAINTENANCE
14 TROUBLESHOOTING
15 INSTALLATION
21 PARTS / SERVICE
21 LIMITED WARRANTY
ELECTRICAL SHOCK HAZARD
Disconnect power before installing or servicing appliance. Be sure the
knob is in the OFF position before plugging the appliance in.
Failure to do so can result in death or electrical shock.
ELECTRICAL GROUNDING
This appliance must be grounded. Grounding reduces the risk of electric
shock in the event of a short circuit.
ELECTRICAL SUPPLY
This appliance is designed to use a grounded receptacle, 120 VAC Single Phase, 60 Hz, with a
current rating as shown in the model number listing on page 6.
Have the installer show you where the electric circuit breaker is located so you know how to
shut off the power to this appliance.
SAFETY PRECAUTIONS - BEFORE YOU BEGIN
When properly cared for, your Hestan appliance will provide safe, reliable service for many years.
When using this appliance, basic safety practices must be followed as outlined below.
IMPORTANT: Save these instructions for the local Utility Inspector's use.
INSTALLER: Please leave these Installation Instructions with the owner.
OWNER: Please retain these Installation Instructions for future reference.
This appliance is NOT designed for installation in manufactured (mobile) homes or recreational
park trailers. Do NOT install this appliance outdoors.
©2021 Hestan Commercial Corporation
EN
3