System Settings; Factory Setting; Software; Language - TechniSat DIGITRADIO 20 CD Mode D'emploi

> Rotate the SCROLL&SELECT knob now to set the value for the treble between
-5 and +5. Then press the SCROLL&SELECT knob to adjust the value for the
bass. You can then activate or deactivate the loudness function.

13 System settings

Open the system settings by pressing the MENU button and using the
SCROLL&SELECT knob select the [Settings] submenu.

13.1 Factory setting

If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
factory settings to delete all the saved stations and then launch a new scan.
> In the [Settings] submenu, select the [Factory setting] item and confirm by
pressing the SCROLL&SELECT knob.
> Use the SCROLL&SELECT knob to select the [Yes] item to reset the factory
settings and press it.
All previously stored stations and settings will now be deleted. The device is
now in the same status as when delivered.
> The device restarts and then automatically performs a complete scan in DAB
mode. While scanning, the display information shows the progress, as well
as the number of digital radio stations detected. After completing the station
scan the first DAB+ channel is played.

13.2 Software

> In the [Settings]submenu, select the [Software] item and confirm by pressing
the SCROLL&SELECT knob.
> Use the SCROLL&SELECT knob to select the [DAB] or [MCU] item and press
the SCROLL&SELECT knob.
The software version currently installed will now be displayed.

13.3 Language

> In the [Settings] submenu, select the [Language] item and confirm by
pressing the SCROLL&SELECT knob.
> By rotating the SCROLL&SELECT knob you can choose German, Italian, English
or French. Press the SCROLL&SELECT knob to accept the language.
30