JFRMEDICAL Humidifier Notice D'utilisation page 19

Maximum Recommended Pressure:
Maximum Pressure:
Water Capacity:
Heater temperature:
Maximum gas temperature:
Pressure Drop:
Input air temperature:
Operating Mode:
Product category in accordance with
Directive 93/42/EEC:
Classification to
IEC 60601-1:2013
against electric shock:
IP protection class:
Guarantee
Humidifier cradle:
Water Chamber:
Humidity Output
According to ISO 80601-2-74 on 23°C
without heated tube:
Note!
Actual average power consumption will vary depending on factors such as
temperature setting, set pressure, the use of accessories, height above sea level and
ambient temperature.
16
TECHNICAL SPECIFICATIONS
30 hPa
50 hPa
To maximum fill line 100% : 380 ml
Approximately + 40 °C to + 74 °C
+ 43 °C
No pressure drop in humidifier.
+ 5 °C to + 40°C
Max. 16 hours
II a
BF type class II
IP 21
Protection from: IP21
Protection against the ingress of solid
foreign bodies ≥ 12.5 mm diameter and
larger, and against vertically falling
water droplets.
24 Months
6 Months
- 5hPa (12 l/min) = 13 mg/l
- 10hPa (18l/min) = 15 mg/l
- 20hPa (28l/min) = 17 mg/l