Battery Change - QUNDiS RNGG55D Notice D'utilisation Et D'installation

Battery change

Organization
Access the device location:
ATTENTION!
Battery replacement may only be carried out by trained and skilled personnel. Only a battery approved for the
Q gateway 5.5 direct may be used, otherwise there is a risk of explosion!
ATTENTION!
After opening the battery compartment, the battery
-
ATTENTION!
PCB may be damaged
-
1. Battery change (standard)
•
• Open the battery compartment
• Remove the old battery.
•
• Close the battery compartment.
•
Battery change for devices with external antenna
• Disconnect the battery connector
• Remove the entire battery compartment
-
• Open the battery compartment and remove the old battery.
•
• Close the battery compartment.
•
2. Testing the connection to the Q SMP
• long press
1
The display
3. Completing the battery change
• Close housing
•
Correct disposal of this product
Products delivered in Germany and directly from Germany
All appliances must be brought to a controlled recycling plant. Due to governing regulations, electrical and electronic appliances
at their own expense.
In countries of the European Community excepting Germany
channels.
V2.1 / 06.06.2019
Operating and Installation Instructions Q gateway 5.5 direct - EN
Tools / Material:
1 slotted screwdriver
1 battery replacement set
7
.
6
7
4 SYNC
FUM5-00AM-DES-G5521
7
On-site preparation:
-
- Open housing
-
27