Setup Instructions - Blue Wave CP2000-C Manuel De L'utilisateur

Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
WARNING:
CLIMBING HAZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTRATION SYSTEM TO GAIN ACCESS TO THE POOL.
1. Set up the pool by following all the instructions that came with
the pool. Do not fill water until the Filter Pump is properly
installed. Locate the Outlet and Inlet openings on the pool wall.
Outlet opening
Inlet
opening
3. Install the Return Fitting on the Inlet opening of the pool.
8
7
6
11
Inside Pool Wall

SETUP INSTRUCTIONS

Outside Pool Wall
9
OWNER'S MANUAL
2. Install the Suction Fitting on the Outlet opening of the pool.
Outside Pool Wall
3
4
4. Remove the Filter Pump , Hoses
y
from the package.
2
1
Inside Pool Wall
and Hose Clamps
r t
13
14
15
9