Preparing For Use; Attaching The Brush Head; Charging The Appliance - Philips Sonicare FlexCare HX6971/33 Mode D'emploi

ENGLISH
10
7 Brushing routines (specific types only)
8 Deluxe battery level indicator
9 Travel charger
10 UV sanitiser with integrated charger and cord wrap (specific types only)
- Not shown: UV light bulb
- Not shown: Sanitiser drip tray
- Not shown: Protective screen for UV light bulb
Note: The contents of the box will vary based on the type purchased

Preparing for use

Attaching the brush head

1 Align the brush head so the bristles face the front of the handle. (Fig. 2)
2 Firmly press the brush head down on the metal shaft until it stops.
Note: When the brush head is attached, it is normal that there is a small gap
between the brush head and the handle.

Charging the appliance

1 Plug the charger in a wall socket.
2 Place the handle on the charger (Fig. 3).
The battery level indicator flashes to indicate that the toothbrush
,
is charging.
Deluxe battery level indicator:
Indicates amount of charge left in battery
- 3 green LEDs: 75-100%
- 2 green LEDs: 50-74%
- 1 green LED: 25-49%
- 1 flashing yellow LED: less than 25%
Note: If the battery charge of the Sonicare is low, you hear 3 beeps and
1 LED on the battery level indicator flashes yellow for 30 seconds after the
2-minute brushing cycle.