Warranty Conditions - Hayward AQUAVAC Mode D'emploi

Masquer les pouces Voir aussi pour AQUAVAC:

Guide de l'utilisateur (18 pages)

Table Des Matières

Table des Matières

Les langues disponibles

Put the cleaner back in the water and switch it back on. In order to protect the fragile components, The cleaner will

cut out automatically if it is removed from the water.

The cleaner IS NOT WORKING ANY MORE

•

Check the socket for the voltage surge switch system to ensure that the power supply is correct.

•

Check the power of the power supply box per section (see below).

•

Check the floating cable per section

CHECKING THE POWER SUPPLY BOX

•

The power supply box is protected by an automatic circuit that interrupts the current. To switch it back on, move

to the "OFF" position and then to the "ON" position.

•

The power supply box is equipped with an internal circuit. The voltage across terminals 1 and 2 of the power

supply socket for the cleaner must be 24 V ~.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

All electrical connections must be done by a qualified electrician according to local electrical standard.

NF EN C 15-100

DIN VDE 0100-702

ÖVE 8001-4-702

UNE 20460-7-702 1993, REBT ITC-BT-31 2002

IRL Wiring Rules + IS HD 384-7-702

CEI 64-8/7

LUX 384-7.702 S2

NL NEN 1010-7-702

RSIUEE

All HAYWARD products are covered for manufacturing defects or material defects for a warranty period of:

• 1 year for standard cleaner

• 3 years for QC cleaner

As of date of purchases. Any warranty claim should be accompanied by evidence of purchase, indicating date of purchase.

We would therefore advise you to keep your invoice.

The HAYWARD warranty is limited to repair or replacement, as chosen by HAYWARD, of the faulty products, provided that they

have been subjected to normal use, in compliance with the guidelines given in their user guides, provided that the products

have not been altered in any way, and provided that they have been used exclusively with HAYWARD parts and components.

The warranty does not cover damage due to frost and to chemicals.

Any other costs (transport, labour, etc.) are excluded from the warranty.

HAYWARD may not be held liable for any direct or indirect damage resulting from incorrect installation, incorrect connection,

or incorrect operation of a product.

In order to claim on a warranty and in order to request repair or replacement of an article, please ask your dealer. No

equipment returned to our factory will be accepted without our prior written approval.

Wearing parts are not covered by the warranty.

Electric Standard/Country