Publicité
Les langues disponibles
Les langues disponibles
Put the AquaVac back in the water and switch it back on. In order to protect the fragile components,
AquaVac will cut out automatically if it is removed from the water.
AquaVac IS NOT WORKING ANY MORE
Check the socket for the voltage surge switch system to ensure that the power supply is correct.
Check the power of the power supply box per section (see below).
Check the floating cable per section
CHECKING THE POWER SUPPLY BOX
The power supply box is protected by an automatic circuit that interrupts the current. To switch it back on,
move to the "OFF" position and then to the "ON" position.
The power supply box is equipped with an internal circuit. The voltage across terminals 1 and 2 of the power
supply socket for AquaVac must be 24 V DC.
Warranty conditions:
All HAYWARD products are covered for manufacturing defects or material defects for a warranty period of 1
year as of date of purchases. Any warranty claim should be accompanied by evidence of purchase, indicating
date of purchase. We would therefore advise you to keep your invoice.
The HAYWARD warranty is limited to repair or replacement, as chosen by HAYWARD, of the faulty products,
provided that they have been subjected to normal use, in compliance with the guidelines given in their user guides,
provided that the products have not been altered in any way, and provided that they have been used exclusively
with HAYWARD parts and components. The warranty does not cover damage due to frost and to chemicals.
Any other costs (transport, labour, etc.) are excluded from the warranty.
HAYWARD may not be held liable for any direct or indirect damage resulting from incorrect installation, incorrect
connection, or incorrect operation of a product.
In order to claim on a warranty and in order to request repair or replacement of an article, please ask your dealer.
No equipment returned to our factory will be accepted without our prior written approval.
Wearing parts are not covered by the warranty.
14
Publicité
