Sd Card Slot - Kollmorgen PCMM AKC-PCM-Mx Mode D'emploi

PCMM Installation Manual | 1 English

1.6.4 SD Card Slot

PCMM offers a SD card slot and push-buttons B2 and B3 to activate file transfers from/to the
PCMM and SD Memory Card. These features can be started from the KAS IDE software as
well. Detailled description can be found in the KAS Online Help.
The backup/restore operations (PCMM to SD or SD to PCMM) will not be possible if an
application is running.
Stop the application from the web-browser or use the B2/B3 "stop" action before initiating
any SD card functionality.
If a fault occurs during save/load operations, the fault number is displayed in the one digit dis-
play with E followed by two digits. Error codes (➜ # 137) .
Supported SD card types
SD cards are preformatted by the manufacturer. The following table outlines the SD card
types and PCMM support.
SD Type
SD (SDSC)
SDHC
SDXC
Features
If an SD card is plugged into the SD slot and no application programm is running, the push-
button menu (started with B3) shows the possible data transfer functions:
16 Kollmorgen | kdn.kollmorgen.com | February 2018
File System
FAT16
FAT32
exFAT (Microsoft)
'backup' to copy firmware, configurations, user application, and user data files from the
PCMM to SD card.
'restore' to load firmware, configuration, user application, and user data files from SD card
to PCMM.
Capacity
1MB to 2GB
4GB to 32GB
>32GB to 2TB
Supported
YES
YES
NO