Samsung RF28K907 Serie Guide D'utilisation page 30

Installation
STEP 3 Adjust the levelling feet
CAUTION
• When installed, the refrigerator must be level on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Levelling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front side a little higher than the rear side.
You can level the refrigerator using the front legs. The front legs have a special screw
(leveller) for levelling purposes. Use a flat-head screwdriver for levelling.
30 English
Untitled-2 30
• To adjust the height of the freezer side:
Insert a flat-head screwdriver into the
leveller of the freezer-side front leg.
Turn the leveller clockwise to raise the
refrigerator. Turn it counterclockwise to
lower.
• To adjust the height of the fridge side:
Insert a flat-head screwdriver into the
leveller of the fridge-side front leg.
Turn the leveller clockwise to raise the
refrigerator. Turn it counterclockwise to
lower.
2018-07-05 5:53:15