Festo CPV -GE-DN2-8 Série Instructions D'utilisation page 22

Type
Pin 1
Operating voltage connection for
electronics
– Rated value
– Tolerance
– Current consumption
Pin 2
Load voltage connection
– Rated value
– Tolerance
– Current consumption
Residual ripple
Electrical isolation
Valves
Detailed information on the CPV Direct DN2 can be found
in the manual P.BE-CP-DN2-.. .
22
CPV..-GE-DN2-8
24 V DC (protection against
incorrect polarity, fused in-
ternally, switches on again
automatically)
20.4...26.4 V
Max. 200 mA
24 V DC (protection against
incorrect polarity, fused in-
ternally, switches on again
automatically)
20.4...26.4 V
Sum of all switched-on CP
solenoid valves; see manual
"CP pneumatics"
4 Vpp (within tolerance)
Bus interface opto-
decoupled
See Pneumatics manual
P.BE-CPV-..
Festo CPV..-GE-DN2-8 0107NH English