Intended Use; Improper Use - Ega Master 79617 Manuel D'instructions

NOTICE – Gives recommendations and important hints for handling the product
IMPORTANT – Indicates application advice and other particularly useful
information.
REMARK: In each case the used symbol does not replace the safety text. The text must
always be read fully. In some cases other symbols will be used with the signal words.
Operating pressure
Power
Number of strokes
Stroke of saw blade
Air consumption
Air connection
Weight approx.
Sound pressure level L
Vibration
ATEX Classification
Remark: Measurement acc. to
(1)
DIN EN ISO 15744
Remark: Measurement acc. to
(2)
DIN EN ISO 28927-8
The performance specifications are guide values only, they depend basically on the
application, the working pressure and the accessories used.
These machines are designed for industrial use only.
Only trained, skilled personnel are allowed to operate the machine. The pneumatic
reciprocating saw is designed for cutting pipes and profiles made of:
• Wood, plastic, non-ferrous metal, cast iron, steel, stainless steel and ductile iron.
It can be applied for:
• Construction, pipeline construction, chemical industry/refineries and offshore (code 79617).
• Mining (code 79618).
Any use deviating from the intended use as described is considered to be improper use.
• Working without personal protection equipment.
• Using the pneumatic band saw in an inadmissable area.
• Cutting self-flammable material.
TECHNICAL SPECIFICATION
(1)
pA
(2)
II 2G Ex h IIB T5 Gb

INTENDED USE

IMPROPER USE

code 79617
6 bar
1.1 kW
360 1/min
60 mm
1.45 m³/min
R ¾" male
7.5 kg
76 dB (A)
< 2.5 m/s²
Measurement uncertainty K: 3 dB (A)
(1)
Measurement uncertainty K: 1.5 m/s
(2)
code 79618
6 (4) bar
1.1 (1) kW
360 (330) 1/min
1.45 (1.3) m³/min
R ¾" male
10.6 kg
I M2 Ex h I Mb T5
2
35