Cooking Advices; Pan Quality; Pan Dimension; Examples Of Cooking Power Setting - Beko BCTI36510 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5

Cooking advices

5.1 Pan quality

Adapted materials: steel, enamelled steel, cast
iron, ferromagnetic stainless-steel, aluminium
with ferromagnetic bottom.
Not adapted materials: aluminium and stain-
less-steel without ferromagnetic bottom, cupper,
brass, glass, ceramic, porcelain.
The manufacturers specify if their products are
compatible induction.
To check if pans are compatibles:
• Put a little water in a pan placed on an induction
heating zone set at level [ 9 ].This water must
heat in a few seconds.
• A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed
on an induction cooking zone. This noise doesn't
mean any failure on the appliance and doesn't in-
fluence the cooking operating.

5.3 Examples of cooking power setting

the values below are indicative)
1 to 2
Melting
Reheating
2 to 3
Simmering
Defrosting
3 to 4
Steam
4 to 5
Water
6 to 7
Medium cooking
Simmering
7 to 8
Cooking
9
Frying, roosting
Boiling water
P and .. 11
Frying, roosting
Boiling water
18 / EN

5.2 Pan dimension

The cooking zones are, until a certain limit, au-
tomatically adapted to the diameter of the pan.
However the bottom of this pan must have a min-
imum of diameter according to the corresponding
cooking zone.
To obtain the best efficiency of your hob, please
place the pan well in the centre of the cooking
zone.
Sauces, butter, chocolate, gelatine Dishes
prepared beforehand
Rice, pudding, sugar syrup
Dried vegetables, fish, frozen products
Vegetables, fish, meat
Steamed potatoes, soups, pasta,
fresh vegetables
Meat, lever, eggs, sausages
Goulash, roulade, tripe
Potatoes, fritters, wafers
Steaks, omelettes, fried dishes
Water
scallops, steaks
Boiling significant quantities of water
Induction Hob / User Manual

Publicité

Table des Matières
loading

Table des Matières