termovana Anna Manuel D'utilisation page 115

The cleaning operation must be carried out by a flue
specialist, who must clean the duct of any flue gases, the
flue and the chimney stack, also checking their efficiency
and issuing a written declaration confirming the safety of
the system. This operation must be carried out at least
once per year.
Cleaning the tank and auger
Each time the pellets are refilled, check for the presence
of any dust/sawdust or other scraps on the bottom of the
tank. If present, remove it with the help of a vacuum cleaner.
The hand protection grille must never be removed
from its housing. Clean the bottom of the tank and
the visible part of the auger.
Cleaning the painted metal parts
Use a damp cloth to clean the painted metal parts. Never
use degreasing substances such as alcohol, thinners,
acetone, benzene, as these may irreparably damage the
paint.
02/2021 - EN
Fig. 3
Fig. 4
25