Automatic Mode; Manual Mode - Oase ProMax MudDrain 25000 Notice D'emploi

Automatic mode

When the water level rises, it lifts the float switch until the switch-on point is reached and the
pump switches on.
When the water level drops, the float switch lowers until the switch-off point is reached and the
pump switches off.
How to proceed:
 Push the float switch cable into the cable clip.
– The shorter the cable between the float switch and the cable clip, the lower the switch-on
point and the higher the switch-off point.

To ensure faultless function, ensure that the length of cable between the float switch and
the cable clip is at least 100 mm long.

The minimum residual water height is only reached in manual mode.

Manual mode

The pump remains permanently switched on if the float switch is positioned vertically (cable
hanging down).
NOTE
The pump can run dry in manual mode. Running the pump dry increases wear.
Switch off the pump when the minimum water level is reached.

EN
POX0015
15