Battery Charging And Activation - APRILIA eSR1 Manuel De L'utilisateur

8. Battery charging and activation

Accessing and activating the battery:
To access the battery, raise the footplate.
To activate the electrical circuit, press the
red button (see photo)
B
Red button
Turn off the scooter, then lift the Connect charger to the charging After charging, close the
footplate. port (B). footplate.
NOTICE
When the device is opened, it is already
charged; however, it is advisable to charge it
for 6 to 8 hours before the first use.
It is also recommended to charge it after
each use and before storing it.
Do not allow the vehicle to fully discharge to
avoid damaging the battery.
Removing the battery:
The battery is removable, use the keys supplied to unlock it, disconnect the power supply
and extract the battery.
11