General Safety Instructions - LaserLiner MoistureFinder Compac Mode D'emploi

Completely read through the operating instructions,
the "Warranty and Additional Information" booklet as
!
well as the latest information under the internet link
at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place
and passed on together with the device.
Function / application
This material moisture measuring device operates in accordance
with the capacitive measuring principle. Moisture-dependent
permittivity of the material is measured between 2 conductive
sensor pads on the underside of the device and the material
moisture is calculated in % with internal material-dependent
characteristics. The intended purpose of the device is the non-
destructive assessment of moisture content in wood, cement
screed and plaster.

General safety instructions

– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limit values in accordance
with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals,
aircraft, petrol stations or in the vicinity of people with
pacemakers – may apply. Electronic devices can potentially
cause hazards or interference or be subject to hazards or
interference.
– The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating fields.
08
EN