General Safety Instructions - LaserLiner RollPilot S12 Mode D'emploi

Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and passed on
together with the device.
Function / application
The mechanical distance measuring wheel is designed for use on straight lines and curves. The mechanical
measuring wheel delivers accurate measured values when measuring distances of up to 9.999,9 m.
The moving pointer shows the exact start and end positions. The folding design and transport case make
the measuring wheel easy to carry.

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope
of the specifications.
– Keep the measuring device away from children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures or significant vibration.
– Avoid moisture and sand; clean thoroughly after use
– Note risk of crushing when assembling from the transport position
– Please ensure compliance with the safety regulations set out by local and national authorities
with regard to the correct and proper use of the device.
7
3
1 Non-slip handle
2 Lock measuring wheel
3 Locking lever
1
2
4 Measuring wheel
with 1 m
circumference
5 Stand (fold-out)
3
8
4
5
9
6 Mechanical counter
7 Delete measured
value
RollPilot S12
6
8 Delete measured
value
9 Moving pointer
for start and end
position
EN
05