Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Line Cord Safety Tips
NOTE: This appliance has a polarized
plug (one blade is wider than the
other). As a safety feature, this plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a quali-
fied electrician. Do not attempt to
defeat this safety feature.
1. To insert plug, grasp it firmly and
guide it into outlet.
2. To disconnect the appliance, grasp
the plug and remove it from outlet.
Do not pull or yank on the cord or
appliance. Do not wrap the cord
around the appliance.
Blade Care
The life of your clippers will depend
on frequency of use, care, application
of oil, and hair type and condition.
The HC-8017B has blades which do
not require additional oiling.
6
How to Use
Oiling the Blades (HC-70)
■ We have pre-oiled and aligned the
■ The blades on your hair clipper
■ Turn unit "on" to distribute oil
■ Not applying enough oil to the
Oil Cautions
■ Use only the light-grade oil
■ Do not use hair oil, grease, or any
blades on your Remington
clipper.
should be oiled
before every
haircut. Simply
place a few
drops of oil on
the teeth of
the blades.
evenly.
blades generally causes cutting
problems. Blades will wear
prematurely and not cut properly if
they are not sufficiently lubricated.
There may also be a pulling
sensation on the hair.
supplied or a suitable alternative
like sewing machine oil.
oil mixed with kerosene or solvent,
as the solvent will evaporate and
leave the thick oil, slowing the
blades.
hair
®
Publicité
Table des Matières
