Teac A-R610 Manuel Du Propriétaire page 10

Muting
To mute the sound temporarily, press the MUTING button.
Press the MUTING button again to restore the sound.
< While muting is engaged, the MUTING indicator blinks.
LOUDNESS button
This button compensate for the loss of bass at low volumes.
Set this button to the OFF position when listening at normal
levels.
How to adjust the balance between the left
and right speakers
Turn the BALANCE knob to adjust the balance of the
speakers.
Normally, set the knob to the center position.
10
Basic Operation 2
Tone Control
Turn the BASS knob to adjust the level of low frequency
information.
Turn the TREBLE knob to adjust the level of high frequency
information.
Source Direct
Press this button to turn on or off the source direct function.
When the source direct function is set to on, the button lights
and you can listen to the sound without tone effects.