DeFelsko PosiTector CMM IS Mode D'emploi page 7

How to Measure (in accordance with ASTM F2170)
PosiTector CMM IS probes, coupled with the PosiTector App or
PosiTector DPM Advanced simplify the process of viewing,
recording and reporting in accordance with ASTM F2170.
Step 1. Evaluate the location to determine how many tests must
be performed.
ASTM F2170 specifies that 3 tests must be performed
for the first 100 m2 (1000 ft2) of concrete and one
additional test for each 100 m2 (1000 ft2) of concrete.
One test must be performed within 3 ft. (1 m) of each
exterior wall.
Step 1b (if using the PosiTector App). The PosiTector App
makes it easy to view, record and report in accordance with ASTM
F2170. The app is available within the App Store (Apple iOS) and
Google play (Android).
Open the PosiTector App and select F2170 from the top
menu bar. Next, select New Project and enter the job
details.
A PosiTector DPM Advanced instrument or spare
PosiTector CMM IS probe can be used to record ambient
temperature as required by ASTM F2170. Under Ambient
Instrument, select an available PosiTector CMM IS probe
or manually enter data from a PosiTector DPM
or.To enable broadcasting, ensure the PosiTector
Advanced is powered on (Bluetooth Smart enabled) or
the battery in the PosiTector CMM IS probe is installed.
Select Ok to save the project.
6