Setting The Timer - Teac MC-DX32i Manuel Du Propriétaire

< The unit can be programmed to turn on and off at a specified
time.
< Adjust the clock before setting the timer.
1 Press and hold the TIMER button for more than 2
seconds and release it when the "hour" value starts
blinking.
"TIMER" and "ON" indicators appear on the display.
< When no button is pressed for 7 seconds, the timer setting
mode will be cancelled.
2
Press the SKIP button (.//) to set the start time
(hour), and then press the TIMER button.
The "minutes" value starts flashing.
3
Press the SKIP button (.//) to set the start time
(minute), and then press the TIMER button.
"TIMER" and "OFF" indiactors appear on the display and the
"hour" value starts flashing.
24

Setting the Timer

TIMER
/
4 Press the SKIP button (.//) to set the stop time
(hour), and then press the TIMER button.
The "minutes" value starts flashing.
5
Press the SKIP button (.//) to set the stop time
(minute), and then press the TIMER button.
6 Press the SKIP button (.//) to select a source
(iPod, CD or TUNER), and then press the TIMER button.
< You cannot select "AUX".