Getting Started - Teac MC-DX32i Manuel Du Propriétaire

The MC-DX32i comes mounted with an adapter for iPod with
color display (40GB, 60GB), "60GB (color) + Photo 40GB/60GB".
To play your iPod through the MC-DX32i, you have first to check
if the factory mounted adapter fits your model of iPod. If it does
not, you have to replace it with a correct one, as explained
below.
1. Remove the adapter from the Dock of the MC-DX32i.
Hold the left and right sides of the adapter and gently pull it
up.
2. Choose the Dock adapter that fits your iPod mobile
digital device.
"Video 30GB" for iPod with video (30 GB).
"Video 60GB/80GB" for iPod with video (60 GB, 80 GB).
"nano" for iPod nano.
"mini" for iPod mini.
"20GB (color) + Photo 30GB" for iPod with color display
(20GB, 30GB, U2 Special Edition).
"60GB (color) + Photo 40GB/60GB" for iPod with color
display (40GB, 60GB).
"20GB + U2" for iPod with Click Wheel (20 GB, U2 Special
Edition).
"40GB" for iPod with Click Wheel (40 GB).
< Use a commercially available adapter to play iPod with dock
connector (with four buttons under the display).

Getting started

3. Insert the adapter into the Dock of the MC-DX32i.
Fit the front edge of the adapter into the Dock, and then
press the back edge of the adapter onto the Dock until a
slight "click" is heard indicating the adapter is inserted
correctly.
< When you need to remove the adapter, hold the left and
right sides of the adapter and gently pull it up.
< When you don't use the Dock, use the supplied cover for the
Dock to prevent dust from settling on the Dock.
Compatible iPod Software
In case your iPod will not work with the MC-DX32i or with
the remote control unit, software update may solve the
problem.
Visit the Apple website and download the latest iPod
Software.
iPod is a trademark of Apple, Inc., registered in the U.S. and
other countries.
1
2
11