Cleaning And Caring For The Lcd Monitor - Dometic PERFECTVIEW M70IP Instructions De Montage Et De Service

PerfectView M70IP
Setting the distance markers (fig. 0, page 5)
8.7
Distance markers help you estimate the distance of your vehicle to objects behind the vehicle.
You can move the distance markers horizontally and vertically.
Activating distance markers
To activate the distance markers, proceed as follows:
➤ Press the "M" button (3) twice to open the "Option" menu.
➤ Press the " " key (4) to select the "Scale" parameter.
➤ Use the "–" (5) and "+" (6) buttons to select the operating mode "On".
Moving distance markers horizontally or vertically
To set the distance markers, proceed as follows:
➤ Press the "M" button (3) to open the "Screen" menu.
➤ Press the " " key (4) to set the "Scale" parameter.
➤ Use the "–" (5) and "+" (6) buttons to select the desired setting.
– : horizontal
– : vertical
➤ Press the "S" button (2) to exit the menu.
➤ Press the " " button (4) to call up the distance marker.
➤ Use the "–" (5) button or "+" (6) button to select the desired position.
➤ Press the "M" button (3) to exit the settings.
9

Cleaning and caring for the LCD monitor

A
NOTICE! Beware of damage!
• Do not use sharp or hard objects for cleaning, as these may damage the monitor.
• Remove the cable before cleaning the monitor to prevent short circuiting.
➤ Clean the monitor with a soft, damp cloth from time to time.
EN
Cleaning and caring for the LCD monitor
23