Managing Recordings; Functional Group Voice Audio Recordings; Audio Recordings Only; Replaying Audio Recordings - Monacor Security DMR-250SET Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4) To increase the replay speed, press the button
(repeatedly). The display will show the speed se -
lected: 2 ×, 4 × or 8 ×. To return to standard speed,
press the button
5) To rewind the recording, press the button
(repeatedly). For rewinding, 8 × the standard speed
is possible as a maximum. To return to fast forward,
press the button
6) To view the recording in slow motion, set the unit to
pause with the button
(repeatedly) to select the speed: 1/ 8 ×, 1/ 4 ×, 1/ 2 ×.
To select 1/ 4 × or 1/ 8 ×, press the button
return to standard speed, press the button
7) To activate and deactivate a submenu while replay-
ing, press the button MENU (7). This submenu
allows you to change the repeat function (Video
Repeat: No / One / All One / All, see chapter 6.1, sub-
menu "Play Setup") and to define if the recording is
to be shown on the display of the recorder or on a
monitor connected to the jack A / V OUT (19) [Dis-
play Out: LCD / TV].
8) To stop the replay, press the button STOP/ ESC (5);
the list of video recordings will reappear. To return
to the basic menu, press the button STOP/ ESC
twice.

8.2 Managing recordings

A submenu allows you to delete recordings or to pro-
tect them against accidental deletion and to display file
information. It is also possible to start the replay.
1) Select the desired recording from the file list with
the button
or
2) Press the button MENU (7) to activate the sub-
menu:
Sub Menu
File Play
File Delete
File Protect
File Information
Note: To deactivate the submenu, press the button
MENU once again.
3) Select the function with the button
activate it with the button
4) When deleting or protecting files, the following
options are available with the button
No
One
All
Press the button
Note: To disable the file protection, select the menu item
"File Protect".
or the button
(repeatedly).
or the button
(repeatedly).
first. Press the button
(12).
(name, size, protection)
or
(13).
oder
to confirm.
9 Functional Group VOICE
Audio recordings

9.1 Audio recordings only

The sound is recorded via the microphone of the cam-
era (21) or, if this microphone has not been connected,
via the internal microphone (8).
1) If the basic menu (fig. 2) fails to appear on the dis-
play, press the button STOP/ ESC (5) [repeatedly].
2) Select VOICE with the button
. To
3) To start recording, press the orange button REC /
.
PAUSE (6) or the button
(22).
4) To pause and continue the replay at any time, press
the button REC / PAUSE or
5) To activate and deactivate a submenu while record-
ing, press the button MENU (7). This submenu
allows you to show the recording time adjusted
(Record Time) and to change the microphone sen-
sitivity (Mic Sensitivity: High / Middle / Low).
6) To stop a recording, keep the button STOP/ ESC (5)
or the button
the display shows the list of audio recordings. The
last recording is selected; press the button
replay it.
To stop the replay, press the button STOP/ ESC;
the list of audio recordings will reappear. To return
to the basic menu, press the button STOP/ ESC
twice.
Notes
1. It is not possible to stop a recording again within the first
5 seconds.
2. When the display shows the list of audio recordings, it is
also possible to start an audio recording with the button
REC / PAUSE.

9.2 Replaying audio recordings

1) If the basic menu (fig. 2) fails to appear on the dis-
play, press the button STOP/ ESC (5) [repeatedly].
2) Select VOICE with the button
press the button
and
list of audio recordings. The file names created by
the recorder are coded as follows:
:
3) Select the recording to be replayed from the file list
with the button
with the button
4) Adjust the volume with the buttons VOL - and + (11).
Note: If there is no sound, set the menu item "Speaker
Control" to ON.
(SETTING → System Setup → Speaker Control)
5) To pause and continue the replay at any time, press
the button
or
on the remote control
.
on the remote control pressed until
or
(13). The display will show the
or
(12) and start the replay
(13).
.
GB
(12).
to
(12) and
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

18.2730

Table des Matières