Instruction - HOESCH Ergo+ Manuel D'utilisation

Instruction

On/Off – all function
If gutter lighting function is available, it is started automatically
On/Off the light
The button is used to switch on/off aditional LED lights in the bathtub.
Function is available only if the water level is above the LED lights
If you switch off this button, you can still use the gutter lighting function.
The colour usage instruction – please look at the instruction of Ergo bathtub with whirpool
system.
Light colour changing switch
It allows to switch two automatic chromotherapy programms. The color of lights can be switched off
only if the LED lights are on.
Additionally, this button can be used as on/off switch for all lighting.
■ Red
■ Orange
■ Yellow
■ Green
■ Blue
■ Indygo
■ Violet
■ Changing the colour of Light 1
■ Changing the colour of Light 2
Pop up open/close
To run the PopUp function, you should first switch on control with the on/off switch.
The time of openning/closing is about 5 seconds.
Restarting during this waiting time (5 sec.) is not possible by electronic system.
GB
9