Table des Matières
Publicité
Before using this machine, please carefully read though these HANDLING INSTRUCTIONS.
Ensure that you know how the machine works, and how it should be operated. Maintain the
machine in accordance with the instructions, and make certain that the machine work correctly,
please store this instriation and other enclosed documents with the machine together.
1. PROFILE OF THE MACHINE (with standard accessories)
1.
Sanding belt limiting plate
2.
Sanding belt
3.
Tracking knob
4.
Sanding disc
5.
On/Off power switch
Standard accessories:
- 1 Hex key
- 1 Sanding disc Ø150mm #80
- 1 Sanding belt 914x100mm #80
- Voltage - Frequency: 230 V - 1~50 Hz
- Motor power: 370 W – 0.5 CV
- Rotation speed: 2850 rpm
- Overall size: 480 x 350 x 325 mm
- Sanding disc: Ø150 mm
- Sanding disc rotation speed: 2850 rpm
- Worktable size (LxD): 215 x 146 mm
- Worktable tilting: 0~45°
- Sanding Belt: 914 x 100 mm
- Sanding belt speed: 435 m/min
- Dust hose connector: Ø67 mm
- Degree of protection: IP20
- Protection class: I
- Net weight: 16 kg
Sound level according to EN 61029-1:
- Sound pressure level: LpA = 85 dB(A)
- Sound power level: LwA = 96 dB(A)
Uncertainty K = 3 dB(A)
We recommend to wear ear protection!
3. GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "power tool" in the warnings refer to your
mains operated (corded) power tool or battery operated (cordless) power tool.
3.1) Work area safety
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
GB
2. TECHNICAL SPECIFICATIONS
18
6.
Sanding disc work table
7.
Miter gauge
8.
Work table locking knob
9.
Dust hood
10.
Belt tension lever
Document:
- Instruction manual (original in English)
Publicité
Table des Matières
