Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Before using this machine, please carefully read though these HANDLING INSTRUCTIONS.
Ensure that you know how the machine works, and how it should be operated. Maintain the
machine in accordance with the instructions, and make certain that the machine work correctly,
please store this instriation and other enclosed documents with the machine together.
The following symbols are located on the machine, nameplate, and carton box:
It is important and imperative that the safety signs on the machine remain readable and understandable.
! Danger ! Ignoring warnings can cause serious injury or equipment damage.
Do not dispose of electric tools together with
household waste material.
Read and understand the instruction manual
before using the machine.
Wear eye protection.
Wear ear protection.
PROFILE OF THE MACHINE (with standard accessories)
1.
Sanding head
2.
Front handle
3.
Folding arm hinge
4.
Main handle
5.
Back handle
6.
Dust hose connector
Standard accessories:
- 1 Hex wrench 5mm
- 1 Srewdriver
- 1 BMC case
- 1 Dust hose (4m)
- 1 Pair of carbon brush
- 6 Sanding papers Ø225mm (Gr. 80/100/120/150/180/240)
- Voltage - Frequency: 230 V - 1~50 Hz
- Motor power: 750 W – 1 CV
- No load speed: 800-1700 rpm
- Sanding pad: Ø215 mm
- Fixing mode: hook & loop
- Sanding disc: Ø225 mm
- Sanding disc type: D weight paper disc or sanding mesh
- Telescopic arm: 1200 to 1800 mm
- Degree of protection: IP20
- Protection class: II
- Net weight: 4.730 kg
GB
SYMBOLS
Please read the following information carefully.
TECHNICAL SPECIFICATIONS
16
Machine nameplate
Wear dust mask.
7.
Telescopic arm
8.
Arm locking knob
9.
Motor
10.
LED Switch On/Off
11.
Dust hose
Document:
- Instruction manual (original in English)
Publicité
Table des Matières
