Cleaning The Moving Head; Specifications - Monacor img StageLine TWIST-1LED Mode D'emploi

3) After selecting the menu item desired,
press the button ENTER.
4) Use the button UP or DOWN to make the
setting.
5) Save the setting with the button ENTER, or
discard it with the button MENU.

4 Cleaning the Moving Head

Clean the lens for focusing the light beams at
regular intervals depending on impurities.
This is the only way to ensure that light will
be emitted at maximum brightness. Before
cleaning, disconnect the mains plug from
the socket. Only use a soft clean cloth and a
glass cleaner. Then wipe the lens dry.
For cleaning the housing, only use a soft
clean cloth. Never use any fluid; it may leak
into the moving head and damage it.
All rights reserved by MONACOR
may be reproduced in any form or by any means for any commercial use.

5 Specifications

Data protocol: . . . . . . . . . DMX 512
Number of DMX channels: 11, 9 or 5
Light source: . . . . . . . . . . CREE LED, white
Pan: . . . . . . . . . . . . . . . . 540°
Tilt: . . . . . . . . . . . . . . . . . . 270°
DMX connections: . . . . . . XLR, 3 poles
Power supply: . . . . . . . . . 110 – 240 V~ /
Power consumption: . . . . 50 VA max.
Dimensions (W × H × D): 17.5 × 24 × 16 cm
Weight: . . . . . . . . . . . . . . 2.8 kg
Subject to technical modification.
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual
Power consumption: . . 12 W
Beam angle: . . . . . . . . . 20°
Pin assignments: . . . . . pin 1 = ground
pin 2 = DMX-
pin 3 = DMX+
50 – 60 Hz
19