dji TAKYON UPDATER Mode D'emploi page 4

Warning
1. Before using the Takyon Updater, always:
a. Remove the propellers or disconnect the ESC and motors.
b. Disconnect all connected serial devices from your computer.
2. Handle the Takyon Updater with care, especially the exposed
metal pins.
Introduction
The Takyon Updater is designed for the Takyon series ESCs.
Connect the ESC to a computer through the Takyon Updater for
upgrade or configuration.
Usage
ESC
1. Download and install DJI Assistant 2 from DJI.com.
2. Connect the Takyon Updater to the ESC with the signal cable
and to your computer with a Micro USB cable. The signal
cable's white wire transmits the control signal ( ); the red
wire transmits the data signal (+); the black wire is the ground
(-). DO NOT reverse signal cables.
Takyon Updater Computer
5