glass 1989 SAUNE Notice D'utilisation page 57

and :
The selection of the parameters is indicated
by viewing the characters in negative (black
on white). When the selection reaches
"AUTO"
"Man" to "Auto"
MAN AUTO
90°C 6:00
>
MAN AUTO
90°C 6:00
>
MAN AUTO
90°C 6:00
>
MAN AUTO
90°C 6:00
S
EE SAUNA PROGRAMMING IN
Changing parameters
temperature set point for sauna (from
40°C to 110°C) at 5°C steps.
h: values within 0÷6 hours interval
(default 6). Setting in 1 hour steps.
mm: values within 0÷55 minute interval
(default 00). Setting in 5 minute steps.
When one of the three parameters is
>
AUTOMATIC
MODE
25
allowed values, by pressing
ATTENTION: You exit the SAUNA NOT
ON screen when:
- no keys are pressed for 5 seconds
the keyboard goes to "READY" status
- pressing (menu) when "AUTO" is
selected, which entails:
parameters
AUTO" sauna setting
screen.
- pressing which entails:
and temperature),
key turns on steady WHITE (see
sauna on mode). The keyboard switches
to display the active sauna screen.
SAUNA PROGRAMMING IN AUTOMATIC
MODE
In this mode, it is possible to program
activation of the sauna function at a preset
time and for a preset duration. To do so,
you must:
110°C) at 5 °C steps.
(hh:mm format with 5 minute steps).
(hh:mm format with 5 minute steps). The
maximum duration is limited to 6 hours.
After having selected "AUTO" mode,
pressing grants access to the
parameter setting
parameter is editable, it is displayed in
negative. The values of the parameter can
and to switch from one parameter to
another (and from hour to minute).
and .
screen; when a
and ; press
EN