Manual Start - glass 1989 SAUNE Notice D'utilisation

ON/OFF BUTTON (stand-by)
Press turn the keypad on and off.
The display shows the last parameter
set, e.g. "SAUNA_OFF" "parameter_
Value".
START/STOP
By pressing the START/STOP button,
you can turn the sauna on and off after
setting the operating parameters.
and KEYS
Use the and keys to browse through
the operating parameters of the sauna.
Sequence of individual operations that can
be selected:
Time
Automatic
Start heating
Session duration
Temperature
Fan
Moreover, within the individual parameter
you can increase or reduce the value of
the selected option by pressing
NOTE: By pressing and holding the
or button, the value goes up or down
quicker.

MANUAL START

Set the duration of the session, see the
"Session duration" chapter.
Then press the "START/STOP" button to
start the sauna with the last values set.
The display shows a message saying
"SAUNA_ON" "Duration_2:30".
To end the session before the set time,
press the "START/STOP" button again.
PROGRAMMED START
Setting when the heating starts
You can set what time the sauna turns on
from 00:00 to 24:00 hours.
To go to the programming mode, press
the and buttons until the message
"Start-Time" appears.
OK" button. The display shows a message
saying "SAUNA_SET" "Start-Time_00:00"
or the last message set.
Set the desired value with the
buttons (e.g. 18:30).
Press the "MENU/OK"
message saying "SAUNA _OFF" "Start-
Time_18:30" appears on the display.
The start time is set.
NOTE: if the settings do not change within
20 seconds, you will automatically exit the
programming.
Session duration
You can set a heating session lasting up
to 6 hours.
To go to the programming mode, press the
and
''MENU/OK'' button. The display shows
a message saying ''SAUNA_SET'' ''Start-
duration_00:00'' or the last message set.
Set the desired duration of the session with
and . the and
Press the ''MENU/OK''
m e s s a g e s a y i n g ' ' S A U N A _ O F F ' '
"duration_STOP'' appears on the display.
The duration of the session is set.
NOTE: if the settings do not change within
20 seconds, you will automatically exit the
programming.
Sauna temperature
You can set the heating temperature from
15°C to 110°C.
To go to the programming mode, press the
and
with the ''MENU/OK'' button, the display
shows a message saying ''SAUNA_SET''
''Temperature_90°C'' or the last message
set.
Set the desired temperature with the
and buttons (e.g. 95°C).
15
buttons until the word ''Duration''
buttons (e.g. 2:30).
buttons until the ''Temperature''
and
EN