glass 1989 SAUNE Notice D'utilisation page 50

"Time_10:00" appears on the display.
NOTE: if the settings do not change within
20 seconds, you will automatically exit the
programming.
ON/OFF BUTTON (stand-by)
EN
Press turn the keypad on and off.
The display shows the last parameter
set, e.g.
''parameter_Value''.
START/STOP
By pressing the START/STOP button,
you can turn the sauna on and off after
setting the operating parameters.
and KEYS
By using the
scroll through the operating parameters of
the sauna function and biosauna function.
Sequence of individual options that can be
selected for the SAUNA function:
Time
Automatic
Start heating
Session duration
Temperature
Fan
Sequence of individual options that can
be selected for the BIOSAUNA function:
Time
Automatic
Start heating
Session duration
Temperature
Humidity
Fan
Moreover, within the individual parameter
you can increase or reduce the value of
the selected option by pressing
NOTE: By pressing and holding the
or button, the value goes up or down
quicker.
LIGHT BUTTON
By pressing the
"SAUNA/CLIMATE_OFF"
and buttons, you can
and
button, you can switch
on the lighting in the sauna, even when
the keypad is in "stand-by" mode. The
sauna will remain lit even if the session
To turn off the light press the
again.
OPERATION IN SAUNA MODE
Select the function by pressing the
button.
MANUAL START
Set the duration of the session, see the
"Session duration" chapter.
Then press the "START/STOP" button to
start the sauna with the last values set.
The display shows a message saying
"SAUNA_ON" "Duration_2:30".
To end the session before the set time,
press the "START/STOP" button again.
PROGRAMMED START
Setting when the heating starts
You can set what time the sauna turns on
from 00:00 to 24:00 hours.
To go to the programming mode, press
the and buttons until the message
"Start-Time" appears.
OK" button. The display shows a message
saying "SAUNA_SET" "Start-Time_00:00"
or the last message set.
Set the desired value with the
buttons (e.g. 18:30).
Press the "MENU/OK"
message saying "SAUNA _OFF" "Start-
Time_18:30" appears on the display.
The start time is set.
NOTE: if the settings do not change within
.
20 seconds, you will automatically exit the
programming.
Session duration
You can set a heating session lasting up
to 6 hours.
To go to the programming mode, press the
18
button
and