Advanced Setup - Honeywell EConnect TL9160AR Manuel D'utilisation

Operating Manual

Advanced setup

Setup functions
Temperature and time formats *
Adaptive Intelligent Recovery **
Programmable mode (Schedule) ***
* You can set the temperature display unit in °C or °F. You can set the time display format
in 12-hour or 24-hour (military time) if the thermostat is in programmable mode.
** Accessible only if you use the thermostat in programmable mode.
When Adaptive Intelligent Recovery is on, the thermostat "learns" how long your heater
takes to reach the set temperature. The thermostat will then determine when to activate
heating so the desired temperature is attained at the desired time. The thermostat re-
assesses the heating start time daily based on the previous day's performance. When
Adaptive Intelligent Recovery is off, heating starts at the set time.
*** Leave at On to use the thermostat in programmable mode. Place at Off to use the
thermostat in nonprogrammable mode.
69-2475EFS—01
Default setting
°F
12h
On
On
18
Options
°C / °F
12h / 24h
On / Off
On / Off