Intended Use - Panasonic ES-LL41 Mode D'emploi

Intended use

• This WET/DRY shaver can be used for wet shaving using
shaving lather or for dry shaving. You can use this watertight
shaver in the shower and clean with water. The following
symbol means suitable for use in a bath or shower.
• Treat yourself to wet lather shaves for at least three weeks
and notice the difference. Your Panasonic WET/DRY shaver
requires a little time to get used to because your skin and
beard need about a month to adjust to any new shaving
method.
• Do not bring the system outer foil into contact with hard
objects.
Doing so may damage the blades as they are very thin and
deform easily.
• Do not dry the main body with a dryer or a fan heater.
Doing so may cause malfunction or deformation of the parts.
• Do not leave the shaver exposed to direct sunlight with the
foil frame detached.
Doing so may deteriorate the waterproof rubber and degrade
waterproof function, which may cause to malfunction.
• Store the shaver in a place with low humidity after use.
Failure to do so may cause malfunction due to condensation
or rust.
• Keep both the inner blades inserted. If only one of the inner
blades is inserted, the shaver may be damaged.
• If you clean the shaver with water, do not use salt water or
hot water. Do not soak the shaver in water for a long period
of time.
PB016461 - ES-LL2141-K551 _(01EN)_08-01-18.indd 9
• Before using a comb attachment, check that it has been
installed correctly. Failure to do so may cause beard to be
cut too short.
• The following symbol indicates that a specific detachable
power supply unit is required for connecting the electrical
appliance to the supply mains. The type reference of power
supply unit is marked near the symbol.
9
2018/8/1 17:25:17