JVC KD-X250BT Manuel D'instructions page 22

Menu operations
Menu item
IPOD SWITCH
(iPod/iPhone control)
PHONE *7
AUDIO
APPLICATION
DELETE PAIR
P. BOOK WAIT
SET PINCODE
AUTO CNNCT
INITIALIZE
INFORMATION
AM *10
PANDORA *10
AUX *10
*7 <CONNECT> will not be displayed if two Bluetooth phones are connected at the same time.
*8 JVC Smart Music Control is designed to view JVC car receiver status and perform simple
control operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website:
<http://www3.jvckenwood.com/english/car/index.html> (English website only).
*9 Displayed only when a Bluetooth phone/audio player/application is connected.
*10 Displayed only when the unit is in any source other than the corresponding source "AM/
PANDORA/AUX".
22 | ENGLISH
Selectable setting (Initial: [XX])
[HEAD MODE]/IPOD MODE/EXT MODE:
For settings, page 9. (Displayed only when the source is "USB-IPOD".)
CONNECT/DISCONNECT: Connects or disconnects the Bluetooth phone/
audio device. ( page 13)
CONNECT/DISCONNECT: Connects or disconnects the JVC Smart Music
Control *8 in the smart phone.
For settings, page 13.
Copies up to 400 numbers from the phonebook memory of a connected
phone to the unit via OPP.
Changes the PIN code (1 to 6-digits). (Default PIN code: 0000)
Turn the volume knob to select a number, press
position. After entering the PIN code, press the volume knob to confirm.
[ON]: Establishes connection automatically with the Bluetooth device when
the unit is turned on.
OFF: Cancels.
YES: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.).
[NO]: Cancels.
PH CNNT DEV/AU CNNT DEV/APP CNT DEV *9: Displays connected
phone/audio/application device name.
MY BT NAME: Displays the unit name (JVC UNIT).
MY ADDRESS: Displays the address of this unit.
BT VERSION: Displays the Bluetooth version of this unit.
[ON]/OFF: Enables or disables "AM" in source selection.
[ON]/OFF: Enables or disables "PANDORA" in source selection.
[ON]/OFF: Enables or disables "AUX" in source selection.
/ to move to the entry