Operating Instructions - Flex XC3401VRG Notice D'utilisation

Polisher XC 3401 VRG

Operating instructions

DANGER
Before carrying out any work on the
polisher, always pull out the mains plug.
Before switching on the polisher
Unpack the polisher and check that
there are no missing or damaged parts.
If required: Remove the bail handle
Attaching the grip cover only
1. Using the hexagon-socket key,
remove the 2 screws from the bail
handle.
2. Remove bail handle and grip cover.
3. Push on grip cover only.
4. Attach grip cover with the 2 slotted
screws.
Switch on and off
Brief operation without engaged switch
rocker:
 Press and hold down the switch.
 To switch off, release the switch.
Continuous operation with engaged
switch rocker:
 Press and hold down the switch.
 To lock into position, hold down the
locking button and release the switch.
 To switch off, briefly press and
release the switch.
11