Connect Your Power Transfer Switch To Nature's Generator - Reliance Controls PRO/TRAN 2 A304 Manuel D'utilisation

Connect Your Power Transfer Switch to Nature's Generator

Once the Power Transfer Switch has been successfully installed by a qualified electrician, you can
now connect your Power Transfer Switch to your Nature's Generator by using the included power cord.
You can connect up to four circuits from your breakers into your Power Transfer Switch. You
may select the most common used circuits like refrigerators, lights in hallway or bathroom,
bedroom outlets and etc. The run time are affected by the combined loading on the connected
circuits and the amount of the Nature's Power Pods that are connected to Nature's Generator.
1. Fit the female connector of the included power cord into the power inlet of your Power Transfer
Switch.
2. Insert the male plug into any of the AC outlets on the Nature's Generator.
1
Visit NaturesGenerator.com for More Information
2
3