Frequency Setting - MAXOAK BLUETTI EB150 Mode D'emploi

FAQ
Q1: How to check charging status?
The battery icon indicates the battery level of this product. The battery level is displayed
in 5 segments. When battery is being charged, the icon would flash. When the battery is
fully charged, the icon would stop flashing and all 5 segments will be filled.
Q2: Can this product be used to charge my electronic devices?
You need to check the power at each output port. For example, the power at AC output
port is provided by the built-in inverter of the product, whose maximum continuous
output power is 1000W. This means that it is only suitable for electronic device whose
required power is no more than 1000W.
Intelligent Cooling Control
Cooling fan will start working automatically when the following conditions are met :
1. The load of inverter exceeds 400w.
2. The load of 5v-USB output port exceeds 10w.
3. The load of Type C-PD output port exceeds 30w
4. The load of 12V cigarette lighter socket exceeds 50w.
5. The charging power of attached appliances exceeds 100W.
Besides, generator intelligent system will adjust the PV input or AC output
power based on the outer case temperature, to keep the outer case at a touchable
temperature.
Note: Do not use the machine when the cooling tan is broken.

Frequency Setting

When the product is powered on, turn on DC output and keep the AC output turned off.
Press and hold both to select output frequency of inverter Press and hold both DC and
AC power button to exit frequency setting mode Restart the machine.
Trouble shooting and technical specification
Error
codes
Over-voltage protection
E001
(battery pack)
Under-voltage protection
E002
(battery pack)
Cause
EN-06
Stop charging and start discharging.
Please charge the product in time. Restart the
machine once it is fully charged.
Solution