Operation Guidance; How To Use The Product - MAXOAK BLUETTI EB150 Mode D'emploi

1

Operation guidance

Attention:
1. the operating environment should meet our requirement.
2. Make sure that the air inlet/outlet is not blocked.
3. Please power off the product if you are not going to use it.
4. Please fully charge the product if you are going to idle for a long period.

How to use the product

Turn on/off the product
1. turn on the product: press and hold the master power button about 2 seconds to turn
on the product. The LED indicator light and the display screen will light up.
2. Turn off the product: press and hold the master power button about 2 seconds to turn
off the product. The display screen and the LED indicator light would turn off.
AC/DC output
Note: check to make sure the product is turned on. Otherwise, you can not turn on AC/
DC output.
1. Turn on AC/DC output: press and hold the AC/DC power button to turn on the product.
The corresponding LED indicator light would light up and the display screen would
show "AC ON/DC ON".
2. Turn off AC/DC output: press and hold the AC/DC power button to turn off the product.
The LED indicator light would turn off and the display screen would show "AC OFF/
DC OFF".
picture is only for reference,
2
pls take the product as the
standard
3
EN-04
4
6
5