Operating Instructions - eurodib T-CBR15 Instructions D'installation Et D'utilisation

OPERATION INSTRUCTIONS
Turn the burners ON about 15-20 minutes before cooking for preheating. Set the knobs to the
desired flame height or temperature. Each valve will control the gas flow to the burner to
bring that area of the unit up to the set temperature. If different temperature settings are to be
used, adjoining areas should be set at progressively higher temperatures using the lowest
temperatures on the outside burners. A uniform and systematic approach to the loading of
the unit will produce the most consistent product results.
Radiants
Place all the radiants in their position. Make sure that the radiants are setting properly into
the slots on the front and rear supports. Radiants should be centered over a straight section
of the burners.
Radiant
Slot
12