Operation - General; Operation - Use - Bestron APC1007 Mode D'emploi

oPerAtion - general

The popcorn maker is only
intended for domestic use,
not for professional use.
1. Measuring cup
2. Lid
3. Popping chamber
4. Motor unit
5. On/Off switch with indicator light
6. Power cord and plug
oPerAtion - using for the first time
1. Take the appliance out of the packaging.
2. Clean the appliance thoroughly to remove any manufacturing residues (see "Cleaning and maintenan-
ce").

oPerAtion - use

• Always use popcorn maize to prepare popcorn.
• Do not add other ingredients, such as butter or oil, to the popping chamber.
• Do not leave the appliance switched on for more than necessary. If you do so the appliance may
overheat and activate the overheating safeguard. Allow the popcorn maker to cool down for 15
minutes before you use the appliance again.
1. Fill the measuring cup (max 50 gr) with popcorn maize, and sprinkle the popcorn maize into the pop-
ping chamber. Do not add more than one measuring scoop of popcorn maize. Do not add any other
ingredients to the popping chamber.
2. Fit the lid to the popping chamber, and fit the measuring scoop to the lid. If you so wish, you can put a
pat of butter in the measuring scoop to melt it.
3. Put a bowl under the opening in the lid.
4. Put the plug into the wall socket.
5. Switch on the appliance by setting the On/Off switch to 'I'. After a few minutes most maize kernels will
pop and fall into the bowl.
You will now have prepared a full bowl of delicious popcorn. If you wish, you can bring your popcorn to
taste using the molten butter in the measuring scoop; you can also add sugar or salt.
6. Switch the appliance off by setting the On/Off switch to '0'.
7. Pull the plug out of the socket.
8. Let the appliance cool down for about 15 minutes before using it again or storing it.
9. Corn kernels may remain in the pop room. Remove it immediately after the appliance has cooled
down. That is to prevent caking of food residues.
1
19
EN
1.
2.
3
4.
5.